Water Distillation Unit For Laboratory Price

Water Distillation Unit For Laboratory Price

These compact and durable water distillation units are designed for easy wall mounting in laboratories, providing a reliable and economical solution for producing high-purity distilled water. Constructed from 304 grade stainless steel sheets, they ensure long service life, resistance to corrosion, and ease of cleaning.

The units are fitted with Kanthal A1 wire heating elements, known for their high efficiency, durability, and consistent performance. They are widely used in schools, colleges, research laboratories, and industries where distilled water of reliable quality is required.

Features

• Wall-mounted design saves space in the laboratory.
• Fabricated from SS 304 grade stainless steel for durability.
• Fitted with Kanthal A1 heating elements for efficient and long-lasting heating.
• Available in multiple output capacities (2, 4, 6, and 10 liters per hour).
• Low maintenance and economical operation.
• Provides consistent supply of high-quality distilled water.

Technical Specifications

Model	WMD2	WMD4	WMD6	WMD10
Output	2 LPH	4 LPH	6 LPH	10 LPH
Wattage	1.5 kW	3 kW	4.5 kW	6 kW
Heater	Kanthal A1 Wire	Kanthal A1 Wire	Kanthal A1 Wire	Kanthal A1 Wire
MOC	Stainless Steel 304	Stainless Steel 304	Stainless Steel 304	Stainless Steel 304
Power Supply	220V, 50 Hz	220V, 50 Hz	220V, 50 Hz	220V, 50 Hz

Applications

• School and college laboratories
• Research institutes
• Pharmaceutical and chemical laboratories
• Industrial testing laboratories
• Hospitals and medical facilities

✅ The Wall Mounted Stainless Steel Water Distillation Unit is the most economical and durable choice for laboratories in India, combining efficiency, reliability, and affordability.

Would you like me to also prepare a professional operating manual (installation, operation, safety, and maintenance instructions) for this water distiller, similar to the analytical balance manual I created?

1. Safety Instructions

• Install the unit on a stable wall surface near a reliable water source and power supply.
• Use only potable water as feed water. Avoid saline or hard water to prevent scaling.
• Ensure proper electrical earthing before connecting power.
• Do not touch the body or heating chamber during operation (surface may be hot).
• Never operate the unit without sufficient feed water.
• Switch OFF and allow to cool before cleaning or servicing.

2. Installation

1. Unpack the unit carefully.
2. Mount the unit securely on the laboratory wall using appropriate fasteners.
3. Connect the water inlet to a clean water supply using standard tubing.
4. Ensure the drain outlet is connected to a safe drainage point.
5. Connect the power cord to a 220V, 50 Hz supply with proper earthing.
6. Check that the unit is firmly mounted and all connections are leak-free.

3. Controls & Components

• Water Inlet Connection – For raw water supply.
• Distilled Water Outlet – Collects purified water.
• Drain Outlet – For waste water and impurities.
• Power Switch – Turns heating element ON/OFF.
• Heating Chamber – Fitted with Kanthal A1 wire heating element.
• Stainless Steel Body (SS 304) – Corrosion-resistant and durable.

4. Operating Instructions

4.1 Starting the Unit

1. Ensure proper water supply is connected and valve is open.
2. Check that the distilled water outlet container is clean.
3. Switch ON the power supply.
4. Heating will begin and distillation starts within a few minutes.
5. Collect distilled water from the outlet into a sterile container.

4.2 During Operation

• Ensure continuous water flow during use.
• Do not allow the boiling chamber to run dry.
• Avoid collecting the first 5–10 minutes of distillate for best purity.

4.3 Shutting Down

1. Switch OFF the power supply.
2. Close the water inlet valve.
3. Allow the unit to cool before draining or cleaning.

5. Maintenance

• Daily: Drain leftover water after each use to prevent scaling.
• Weekly: Clean the boiling chamber with a soft cloth.
• Monthly: Descale using mild acid (e.g., 5% dilute HCl), rinse thoroughly before reuse.
• Annually: Inspect electrical connections and heating element. Replace if necessary.

6. Troubleshooting

Issue	Possible Cause	Solution
No distillate output	No water supply / Power OFF	Check water and power connections
Low distillate output	Scaling inside chamber	Clean and descale boiling chamber
Water leakage	Loose pipe connection	Tighten inlet/outlet connections
Overheating	Insufficient water flow	Ensure proper continuous water supply
Burnt heater	Dry running without water	Replace heater; always ensure water flow

7. Warranty & Service

• Covered under LABPRO standard warranty against manufacturing defects.
• Warranty excludes scaling damage, heater burnout due to dry running, or improper installation.
• For service and spare parts, contact LABPRO Customer Support with model and serial number.